Volt Amp Co - Aston Electronics
Humble ODV 18

Overdrive Special ODS 100


Aston Electronics offer a range of hand built amplifiers known as Volt Amp Co ® Volt Amplifiers are produced to the highest standard and use only the best components to give a natural tone, long life and guaranteed reliability. Extra care is taken with regards to the wiring and soldering of each component and only the best quality eyelet boards are used.

We will be adding more Volt Amplifiers to this page in the near future, but for now, I will leave you with our most popular model.


Volt Amplifiers are now Available with

TubeSync ® The Output Valve Biasing System

Please click on the tab above for more information of this revolutionary biasing system.



Product Review

Over-drive Super RR


The Overdrive Super RR ® is more musical instrument than amplifier. It has the sweetest ‘bell-like' clean tones, and a harmonically rich, expressive and dynamic overdrive. It will not interfere with your guitar's natural tone in any way, but you will definitely know it is there and be mighty glad that it is. If you are a player that appreciates the king sized tones of Larry Carlton and Robben Ford then we have the amp for you.

To get your taste buds going listen to the sound clips before you go any further you will hear "The Tone" of a great amp.

To listen to the clips online, you will need the Flash plugin. Alternatively, you can click the name of each guitar download the MP3.

Click Here To View The Recording Notes





Live Clips with Rob Rolph in Nearly Dan

These are short solo clips but give a real idea of what the amp can do.

My Old School

The Nightfly





Here she is

For possibly the first time in the UK a British boutique amp builder has gone in search of the fabled “D” or ‘Dumble' sound. What started as a one-off custom amp request by Rob Rolph (guitarist) has become a mission to build a production model which holds true to the original's legendary tone, build quality and durability. Yet also incorporates the modern amp features most useful to the working guitarist that were not found in the original specifications.

The Over-drive Super RR ® is available in 50watt or 100watt versions and in heads or 112, (1x12) combo models. Although, 2x12 extension cabinets can be built on request. Following many months of testing, you may be surprised to find, the standard speakers fitted are Celestion G12 K100 with which we've had great results. Of course custom requests are negotiable. You want a certain driver? Okay let's talk.

There are many features with the ODV S-RR.

There are a number of pre-amp tone shaping switches but unlike most “D” types there is no Bright switch, it proved unnecessary (Treble and Presence have got it covered). There is a Mid-Boost (footswitch able) and a Deep switch. The character of the amp and behaviorof the tone controls are all affected significantly by the Rock/Jazz switch. The Rock setting has more gain and bite (Ford-ish) and the Jazz has a sweeter smooth drive (Carlton-ish). The overdrive sound is produce by adding gain stages to this core tone, and therefore shares the same tone controls (and all boost options).

Two controls are employed to control the overdrive section. The first is Gain, which affects how much signal is fed to the overdrive stages giving you that drive tone. The second is Level; this is used to balance your OD sound level to your clean level.

There are various stages of extra boost available from the amp which work in both clean and OD modes, as mentioned earlier there is a Mid-Boost which alters the mid/treble content for a more focused tone, there is also a Pre-Amp-Boost which bypasses the tone stack for an increase in gain. As an extra feature, the amount of Pre-Amp-Boost is variable via a discrete chassis pot near the V1 valve.

The Master Volume affects both clean and OD sounds and sets the overall amp volume, and unlike many “D” type amps it is positioned post effects loop instead of pre. In some amps of this type it is the Effects Return that ultimately determines the amp's maximum volume, not here. Consequently with the ODS-RR, turning up the Master Volume during the gig, won't lead to clipping the front end of the effect (once the loop has been set up).

The amplifier incorporates a built in valve cathode driven effects loop, with a -10db Trim to interface with a wide variety of effects units. The loop operates in series mode, but has the added feature of being switchable in/out from the back panel. This enables the loop to be gain-matched much more easily, or allows the amp to run in its purest mode when required. Ideal for studio work.

Another feature is the valve driven Accutronics 3 spring Reverb, a high quality unit which has a short chassis, positioned to remove the chance of any RF interference from hi-voltages etc. within the amp. It delivers a luscious warm but open reverb, controllable via a rear mounted pot. Note - the switch that defeats the loop also defeats the reverb return.

Please take note that the amp is entirely hand wired using traditional methods employing eyelet boards, common star grounding and point-to-point wiring. Remember also that the audio signal path is' tubes all the way through', no op-amps, no IC's and definitely no digital !

The output stage features separate 4, 8 and 16 ohm outputs, Full and half power switch (100 watt version), AC and standby switches and a detachable IEC power cable socket with external fuse.

The chassis is made of hi-grade aluminium, which is anodized for corrosion protection.

All valves, transformers or large components are mounted directly onto the chassis.

By using extensive lengths of shielded internal signal cable, and meticulous positioning of the audio and power lines, the amp is quiet and virtually free of hum at all operating levels.

A chassis mounted DC fan is added to remove heat, which is switchable for silent studio operation.

All amps are given a 100 hour burn in period on factory valves, to stabilise new components, plus detect any early life component failure, then it's re-valved and re biased ready for delivery.

Every amp is delivered with a 2 year limited warranty against defects or component failure for the original registered owner. This also covers factory delivered tube failures up to 3 months after amplifier purchase. Please note- this does not include shipping costs.

Footswitch 3 Way

The standard footswitch deploys the Overdrive, the Pre-Amp-Boost and the Mid-Boost each separately or in any combination of the three you like. All these features are also switchable from the chassis with the footswitch disconnected.

ODV S-RR Features

15mm Birch ply cabinets with tough tolex covering and marine grade stainless steel screw fittings.

Anodised aluminium chassis

Orange Drop capacitors

Carbon composite and metal film resistors

Gold plated Neutrik jack sockets.

Carling switches

Alpha potentiometers (solid metal shaft)

High quality Tyco miniature toggle switches.

Switchable chassis fitted DC fan to cool high temperature components and extend life.

Full function foot switch included.

ODV S-RR Specifications

Size (width x depth x height):

Head: 21" x 10.5" x 11"

Weight (Head):

100-Watt 40 lbs


Tube compliment:

5 X 12AX7 preamp tubes

2 X 6L6 (50 Watt)

4 X 6L6 (100 Watt)



Input Impedance: 1 Meg

Output impedances: 4 and 8 and 16 Ohms


ODV S-RR 50 Head


ODV S-RR 50 112 Combo


ODV S-RR 100 Head


ODV S-RR 100 112 Combo


The ODV range of amplifiers are supplied with Tubesync ®

Incidentally , The Volt Over-drive Super RR is not just a precision amplifier; it is designed to be a musical instrument in its own right.

If you are interested in the Over-drive Super RR (ODV S-RR), please contact us, by either Clicking Here or Telephone us at 01785 812071.

Demonstration available at our local studio by appointment.

Note the web page will be updated with more info in a few days time.

For Web Mail users, please email infonospam@astonelectronics.co.uk






ODV S RR Custom order in Blond

We are happy to customise your amp at no additional cost, provided we have the material in stock.





Vintage Series

Vintage 45®

If you're looking for a high quality hand wired amplifier, this is the amp for you. Hand built in England just as they where in the 60's and 70's. using only the best in components to keep the original tone. We use Carbon Composite resistors, Orange drop capacitors and Alphapots. This amp provides you with a creamy 60's crunch that guitarists yearn for. The Vintage 45 is based on the very popular JTM45 amplifier originally manufactured in 1962. Think Eric Clapton Beano Album and you will have am idea of the tone.

The Vintage 45 contains three ECC83's and 2 KT66 valves. When cranked, it screams vintage rock and when boosted using a pre-amp pedal, it screams lead guitar solo!

Price £1299.00


Ever thrown your amp in the back of a van and next time you turned it on, it was dead? Each Vintage 45 is hand made and every component is secured and placed logically to prevent damage when being transported.

If you are interested in the Vintage 45, please contact us, by either Clicking Here or Telephoning us at 01785 812071.

For Web Mailusers, please email infonospam@astonelectronics.co.uk






Optimized for Internet Explorer 7
Optimized for Firefox 3

Copyright Aston Electronics